At Jyani Interior, we offer Full Home renovation and Interior designer work that make your home look the real home of your dream.
We at Jyani Interior are one of the best civil contractors in Thane for Interior Designers, Home Renovation, Kitchen Modification, and other related Civil Contractors in Thane to make your house a place to live with harmony and pleasure.
Flooring and tiling at any place where you spend most of your time undergo various stresses like wear-n-tear, furniture loads, abrasion, different types of chemical cleaning, and much more. Hence, it is very important to have high-quality flooring and tiling whether it is a residential area or a commercial one. Before choosing the flooring material for your site, it is very important to check its durability, comfort and cost.
If you are looking for a solution for all this then we are the best tiles, flooring, and marble work contractors in Thane and Mumbai. We have a team of skilled interior designers who can surprise you with their creative ideas and designs. Provide our tile and flooring service for any residential construction, commercial construction, home improvement, remodeling or any other repair project. Jyani Interior's team executes all our projects by keeping clients' requirements in mind and providing them the solutions with the latest marketing trends.
At Jyani Interior we are licensed and insured tile and flooring work contractors in Thane and Mumbai. We study the area of the project site and then suggest what size of tile should be appropriate for it as tiles come in various sizes. After deciding the color, size, and design of the tiles.
The Floor Is Decided by the Base, Not the Catalogue
Flooring and tiles work in Thane is decided by the base, not the catalogue. Levels, substrate condition, slope, tile size, grout, skirting, and room use all have more impact on the final result than the tile design does. The base decides whether the floor stays level and clean after handover.
We handle flooring and tile work for full home renovation, bathrooms, kitchens, balconies, living rooms, bedrooms, and wall tiling. The old floor condition, level difference, door clearance, bathroom slope, and tile-over-tile possibility are all checked before the method is confirmed.
What Flooring and Tile Work Covers
The scope covers old tile removal, floor levelling, tile-over-tile work where suitable, vitrified tile installation, bathroom floor and wall tiles, kitchen dado tiles, balcony tiles, skirting, grout, tile spacers, slope correction, marble or stone work where required, and finishing.
Tile work fails when the basics are skipped — uneven substrate, wrong grout width, bad slope, missing skirting detail. The finish is only as good as the prep underneath it.
What Is Included in Our Flooring & Tiles Scope
A complete flooring and tile quotation from Jyani Interior covers every check below — no surprises during execution.
| Category | Details | Notes |
|---|---|---|
| Tile and Material Options |
| Wide range of finishes and durability options to suit different spaces. |
| Pre-laying Base Work |
| Ensures proper installation and prevents future issues. |
| Installation and Finishing |
| Professional finishing for durability and clean aesthetics. |
Tile-Over-Tile or Full Replacement — Which One Is Right?
This is one of the most common questions in renovation. Both methods work, but for different conditions.
Tile-over-tile can save time and reduce demolition mess if the existing floor is sound, level, and not hollow. It does not suit a floor that is loose, cracked, uneven, damp, or already too high for the doors and thresholds.
In CIDCO-era buildings and older Thane flats, we almost always recommend full replacement because the original tile work was rarely level enough to build on. Tile-over-tile on an uneven base just transfers the problem upward.
Full replacement is the better call when the floor has hollow tiles, level problems, or major layout changes. It creates more debris and takes longer, but it gives a stronger base and lets us correct the substrate before new tiles go in.
The right choice is decided at the site visit, after checking the existing tile condition with a tap test, level checks at multiple points, and the door and threshold clearances.
Room-by-Room Tile and Flooring Selection
Living and Bedroom Flooring
Living and bedroom flooring decisions should account for movement, furniture load, skirting, door clearance, and cleaning. Large vitrified tiles look clean, but they need good levelling and skilled installation. An uneven base shows up immediately when the tile size grows. Wooden and laminate flooring works well for bedrooms where comfort matters more than scratch resistance.
Bathroom and Wet Area Tiles
Bathroom tiles need waterproofing, slope, anti-skid floor finish, correct drain position, and proper wall preparation. Floor tiles should not be glossy. Wall tiles have to match plumbing and CP fitting positions so the cuts look clean rather than improvised. Bathroom tile work coordinates closely with bathroom renovation scope.
Kitchen Tiles
Kitchen tiles should be easy to clean and suitable for daily cooking and washing conditions. Dado tile colour and pattern is coordinated with the modular kitchen shutter finish — selected together, not separately.
Balcony and Utility Areas
Balcony and utility areas need slope and water management. A flat tile surface that holds water is bad execution, not a design feature. Outdoor-rated tiles, anti-skid texture, and proper grout sealing matter more in these areas than design.
Marble and Premium Flooring
We also provide marble work for homes, offices, hotels, and selected premium spaces. Marble gives an elegant look, but it should be selected and installed properly based on room use and maintenance requirement. We guide clients on marble selection, layout, finish, and practical use.
Thane, Mumbai & Navi Mumbai
Jyani Interior is based in Thane Manpada and provides full interior design and civil work across Thane, Mumbai and Navi Mumbai. Thane and Thane West come first, with the same complete scope extending across the MMR — a site visit confirms society rules and access before we begin.
Thane
- Manpada,
Ghodbunder Road,
Thane West,
Majiwada,
Hiranandani Estate,
Kasarvadavali,
Kolshet Road,
Kapurbawdi,
Patlipada,
Waghbil,
Brahmand,
Owale,
Vasant Vihar,
Pokhran Road,
Naupada,
Panchpakhadi,
Wagle Estate,
Vartak Nagar,
Kalwa,
Mumbra,
Diva,
Mumbai
- Mulund West and East,
Bhandup,
Nahur,
Vikhroli,
Powai,
Ghatkopar,
Andheri,
Borivali,
Kandivali,
Malad,
Goregaon,
Bandra,
Dadar,
Chembur,
Navi Mumbai
- Airoli,
Ghansoli,
Rabale,
Kopar Khairane,
Vashi,
Sanpada,
Nerul,
Belapur,
Kharghar,
Kamothe,
Panvel,
Ulwe,
Taloja,
What types of flooring and tile work do you handle?
Vitrified tiles, marble, granite, wooden flooring, laminate flooring, SPC flooring, bathroom tiles, kitchen dado tiles, balcony tiles, wall tiling, and tile-over-tile work. The right choice is suggested at the site visit based on room use, substrate condition, and budget.
Can you do tile-over-tile, or do I need to demolish the old floor?
Both methods work but for different conditions. Tile-over-tile suits floors that are sound, level, and not hollow. Full replacement is needed when tiles are loose, cracked, hollow, uneven, or when the door clearance has run out. We check the existing floor at the site visit with tap tests and level checks at multiple points before recommending the method.
Which tile size works best for Indian homes?
600×600 and 800×800 vitrified tiles are the most common choice for living rooms and bedrooms in Thane and Mumbai flats. Larger tiles (1200×600 or 1200×1200) look cleaner but need very precise levelling — they magnify any unevenness in the substrate. For bathrooms and balconies, smaller tiles (300×300 or 600×300) work better because of the slope and grip requirement.
Do you provide marble work?
Yes. We provide marble work for homes, offices, hotels, and selected premium spaces — Italian marble, Indian marble, and granite. We guide clients on marble selection, layout, finish, and practical maintenance based on room use.
Is flooring work done with or without other renovation scope?
Both. Flooring is taken as a standalone scope (one-room tile change, bathroom retile, kitchen dado update) or as part of full home renovation. The site visit confirms what other coordination is needed — for example, whether door bottoms need trimming for the new floor height.
Do you provide commercial flooring?
Yes. We provide flooring and tile work for offices, shops, hotels, public areas, and commercial spaces. Commercial flooring is selected for durability, foot traffic capacity, and maintenance — different criteria from residential.