# Electrical Points for a 2BHK in Thane: Room Checklist - Link: https://jyaniinterior.com/electrical-points-2bhk-thane/ - Published: 2026-05-31T12:00:00+05:30 - Author: Bhawarlal Jyani **In short:** Electrical points for 2BHK flats should be planned against the final furniture and appliance layout before any carpentry, since moving a point later means cutting and patching. The kitchen needs the most, with dedicated points per appliance, and bedrooms need bedside and AC points positioned clear of wardrobes. A builder hands over a 2BHK with the minimum points to pass — rarely the points a modern family actually uses. The result is extension boards on the counter, a charger trailing across the bedroom, and a switch stranded behind a wardrobe. None of it is expensive to get right while the walls are open; all of it is a nuisance to fix afterwards. Here’s a practical, room-by-room point checklist for a 2BHK, planned the way it should be — against your real furniture and appliances, before any carpentry. ## The principle: plan against furniture, before carpentry Every point below should be marked against the _final_ furniture and appliance layout before carpentry begins. Once walls are closed and units installed, moving a point means cutting and patching the finish. This is the core of our electrical work in Thane approach, and the general planning method is in our guide to [electrical point planning for a kitchen and living room](https://jyaniinterior.com/electrical-point-planning-modular-kitchen-living-room/). ## Kitchen The room that needs the most points — a dedicated point each for the chimney, hob( if electric), refrigerator, microwave, water purifier, mixer and small appliances( a counter-level run where you prep), plus a dishwasher/washing-machine point if they live here, and under-cabinet lighting. Heavy appliances belong on separated circuits, not shared boards. These are marked before the [modular kitchen](https://jyaniinterior.com/service/modular-kitchen-in-thane/) is fabricated. ## Living and dining TV power and data behind the panel, a cable route to the set-top box and router, sofa-side points for lamps and charging, fan and layered-light circuits coordinated with the ceiling, an AC point clear of the curtain track, and one or two spares. The ceiling lighting points are planned with the [false ceiling work](https://jyaniinterior.com/service/pop-false-ceiling-work-in-thane/) before it closes. ## Master bedroom Bedside points on both sides (light + charging), a point for the TV if planned, the AC point positioned for the unit and clear of the wardrobe, a dressing-unit point, and a fan/light circuit. Position the bedside and dressing points against the actual furniture so none ends up behind the wardrobe. ## Second bedroom This room often doubles as a study or child’s room, so plan for flexibility: a study- table point with cable access, bedside points, an AC point, and a fan/light circuit. A couple of spare points here pay off when the room’s use changes. ## Bathrooms A geyser point on its own circuit with an isolator, an exhaust-fan point, a mirror- light or shaver point, and a washing-machine point if it lives in the bathroom. Wet-zone points are positioned and rated for safety. ## Utility, passage and common areas A washing-machine point (if in the utility), a passage light (a two-way switch is convenient for a longer passage), the doorbell, an inverter point if planned, and the DB board position. The board should be sized to the real 2BHK load, not the builder’s minimum — the cost side is in our [electrical work cost in Thane](https://jyaniinterior.com/electrical-work-cost-thane/) guide. ## How to use this checklist Walk your 2BHK with the furniture and appliances marked, run through each room above, and mark every point against the drawing before carpentry. To plan the points for your actual 2BHK, our [electrical work in Thane](https://jyaniinterior.com/service/electrical-work-in-thane/) team starts with a site visit. ## Frequently Asked Questions **How many electrical points does a 2BHK need?** More than the builder provides — the kitchen alone needs a dedicated point per major appliance, and each room needs points planned against the actual furniture. There’s no single number; it’s set by your appliances and layout, planned before carpentry. **Which room in a 2BHK needs the most points?** The kitchen — dedicated points for the chimney, hob, fridge, microwave, purifier, small appliances and under-cabinet lighting, with heavy appliances on separated circuits, all marked before fabrication. **When should 2BHK points be planned?** Against the final furniture and appliance layout, before any carpentry. Moving a point after walls are closed and units installed means cutting and patching the finish. **Should bedrooms have points on both sides of the bed?** Yes — bedside points on both sides (light plus charging), positioned against the actual bed and wardrobe so none ends up hidden behind furniture. **Does the DB board need upgrading for a 2BHK?** Often — the builder’s board is sized to the minimum, not a modern appliance load. A board sized to the real load with dedicated circuits and RCCB protection is the safe call; the cost is in our electrical work cost guide. ## Related reading * [Modular Kitchen Cost in Thane West: What Drives the Price](https://jyaniinterior.com/modular-kitchen-cost-thane-west/) * [Modular Kitchen Cost in Thane: L vs U vs Parallel Layout](https://jyaniinterior.com/modular-kitchen-cost-thane/) * [Modular Kitchen Design in Thane: Complete Buyer’s Guide](https://jyaniinterior.com/modular-kitchen-design-guide-thane/)